Article List

• What Should Consider in the 3D Printing Technology?

  This article is a brief introduction of the limitations of 3D printing technology.

  News September 17, 2019
• What Need to Consider in the Mold Building?

  This article mainly introduces mold manufacturing and service performance. `

  News November 04, 2019
• Where Can Rapid Prototyping Technology Used？

  The main content of this paper is about the future development direction and main significance of rapid prototyping.

  News September 06, 2019
• How Does Pad Printing Work？

  This article is a brief introduction of the related knowledge of the pad printing.

  News November 07, 2019
• Why Does Product Design Need Prototype?

  This article mainly introduces the reason why product design needs prototype.

  News November 05, 2019
• Post processing for SLA printed parts

  A comprehensive guide describing the range of post-processing options for SLA printed partsarrow_forward Introductionarrow_forward Basic support removalarrow_forward Sanded support nibsarrow_forward Wet sandedarrow_forward Mineral oil finisharrow_forward Spray paint (clear UV protective acrylic)arro

  Surface Finish January 11, 2023
• Selecting the Right Material for Injection Molding

  With over 85 thousand types of injection molding plastic materials to choose from, you can only imagine how overwhelming it can be for product designers, entrepreneurs, and others alike to pick just the right material to manufacture their product.But don’t get discouraged — it is much easier to pick

  Material January 09, 2023
• Selecting the right CNC material

  This comprehensive guide compares the 25 most common materials used in CNC machining and helps you choose the right one for your application.IntroductionCNC machining can produce parts from almost any metal or plastic. Due to this wide range of available materials, the selecting the right one for yo

  Material January 06, 2023
• Choose the right 3D printing process through materials

  Choose the right 3D printing process through materials The 3D printed material is usually of the filament type, powder type or resin type (depending on the 3D printing process used). Polymers (plastics) and alloys are the two main types of components for three-dimensional printing, while other mater

  Material November 19, 2019
• Plastic material selection principles

  This article mainly talks about plastic material selection principles.

  Material May 06, 2022