Article List

• Introduction of commonly used die casting aluminum alloys and zinc alloy materials

  Introduction of commonly used die casting aluminum alloys and zinc alloy materials

  Material July 24, 2019
• Common Material of Plastic Mold

  This is the forum of Common Material of Plastic Mold.

  Material July 25, 2019
• The Characteristics and Injection Molding Process of Commonly Used Transparent Plastics

  Because of the plastic has light weight, good toughness, easy molding. Low cost and other advantages, so in modern industry and daily products, more and more use of plastic instead of glass, especially in the application of optical instruments and packaging industry, the development is particularly

  Material November 03, 2021
• Advantages of 3D printing sand casting and traditional sand casting

  This article mainly introduce the advantages of 3D printing sand casting and traditional sand casting

  Manufacturing Process July 14, 2022
• 3D printing sand casting production process

  This article is an introduction to 3D printing in sand casting process.

  Manufacturing Process July 08, 2022
• What is Sand Casting

  This article is an introduction to sand casting.

  Manufacturing Process July 08, 2022
• Design to reduce the cost of plastic parts

  This article mainly talks about designs to reduce the cost of plastic parts.

  Product Design March 18, 2022
• Transparent product design appreciation

  The transparent surface of the product gives people a light and transparent psychological feeling, evoking the desire for "light life". The unique warm touch of wood is reassuring and brings a feeling of returning to nature. The combination of transparent and wooden materials can create a sense of t

  Product Design November 04, 2021
• Summary of Technical Requirements on The Drawing for Machining Parts

  I, The technical requirements of outline of part 1, The standard tolerance of outline not noted in the drawing should be in accordance with the requirements of GB1184-80 guidelines.2, The standard tolerance size of length not noted should be within ± 0.5 mm.3, The radius of Corners not noted can be

  Product Design September 03, 2021
• A Guide on How to Improve the Appearance of Plastic Products.

  In today's increasingly competitive market, the appearance of the product has become one of the important factors to attract consumers to buy the product. Due to the plastic material itself and the characteristics of the injection process, plastic parts are easy to produce shrinkage, bubbles, fusion

  Product Design January 25, 2021