Article List

• A Guide on How to improve the strength of Plastic Products.

  The strength of plastic parts is always a subject of concern for mechanical engineers. Compared with metal parts, the strength of plastic parts is generally low, but through reasonable part design, the strength of plastic parts can be increased significantly, which can expand the range of applicatio

  Product Design December 21, 2020
• What is 3D metal printing?

  Metal printing, also known as additive manufacturing, is a process for manufacturing three-dimensional parts based on digital files. This technology can use thin-layer metal powder materials to produce complex shapes that cannot be achieved with traditional techniques such as casting,

  Manufacturing Process May 22, 2020
• A Guide on How to Design Holes of Plastic Products

  This article talks about a guide on how to design holes of plastic products.

  Product Design October 12, 2020
• A Guide on How to Design Draft Angle of Plastic Products

  There is no specific standard for the draft angle, and most of them are determined by experience. Usually, any sidewall of the molded product has a draft angle so that the product can be taken out of the mold.

  Product Design June 09, 2020
• What is CNC machining technology?

  CNC is an abbreviation of "Computer Numerical Control", which is a manufacturing process in which pre-programmed computer software indicates the movement of factory tools and machinery.

  Manufacturing Process November 27, 2019
• What Is Low-Volume Production?

  Low volume production is the manufacture service which offer full production-quality product but in quantity per order usually limited to 100,000 pieces or fewer, depending on different processes.

  Manufacturing Process July 15, 2019
• A Guide on How to Design Stiffener of Plastic Products

  In order to ensure the strength and rigidity of the plastic part and not to cause the wall thickness of the plastic part to be too thick, the reinforcing rib can be set at the appropriate part of the plastic part to avoid the deformation of the plastic part.

  Product Design July 29, 2020
• A Guide on How to Design Wall Thickness of Plastic Products

  1. The role of wall thickness(1) Make the product have a definite structure and certain strength and rigidity to meet the use requirements of the product.(2) It has a good flow state (such as the wall cannot be too thin) and filling and cooling effects (such as the wall cannot be too thick) during m

  Product Design June 03, 2020
• Metal 3D printing technology: the simple difference between SLM and SLS

  3D printing technology is rapidly changing the traditional way of production and life. In just 30 years, 3D printing technology has been developed rapidly and has been widely concerned by all countries in the world. With the cont

  Manufacturing Process December 31, 2019
• Merry Christmas and Happy New Year!!!

  We would like to extend our warm wishes for the upcoming holiday season.

  News December 25, 2019